Neopaque 'Sneaker' Farbe Jacquard | 67ml | Volt
Available, delivery time: 1-3 days
Jacquard Neopaque Sneaker: the colours of the sneaker scene
Volt, Miami, Gamma Blue, Fire Red: everyone who is passionate about sneakers knows these colour names.
The Neopaque Sneaker Series brings exactly these shades into the paint pot, inspired by the typical colours of the big sneaker collections.
Behind it is the proven Neopaque quality: super-opaque on light and dark surfaces, elastic and extremely durable.
It does not crack, flake or break, not even on a shoe that takes thousands of steps every day.
And the palette is exciting not only for sneakers, but also for costumes, bags and props.

At a glance
• Super-opaque fabric and leather paint, 67 ml or 236 ml
• 8 sneaker shades: 450 Volt, 451 Miami, 452 Gamma Blue, 453 Military Green, 454 Fire Red, 455 Navy, 456 Tanned Leather, 457 Concrete Grey
• Mixable with all other Neopaque colours
• Adheres to leather, imitation leather, vinyl, canvas, rubber, plastic, fabric and Worbla
• Elastic and very hard-wearing
• Self-fixing after about 4 days
Painting sneakers: how to get it right
Clean the shoe thoroughly and degrease smooth leather. Tape off the sole and areas that are to stay clean. Apply the paint in several thin layers and let each dry well. This makes the result even and durable.
What do I use to apply the paint?
With brush, stamp, pads, spray bottle or airbrush. For the airbrush, dilute with up to 25% water. Ready-mixed sneaker colours for the airbrush are available as Jacquard Airbrush Color Sneaker Series. To dilute without loss of adhesion, use Neopaque Flowable Extender.
Self-fixing
Let the painted pieces cure for about 4 days, after which they are hard-wearing and washable. You will find all details in the “Fixing” tab. For metallic accents, we recommend Jacquard Lumiere.
Contents
• 67 ml or 236 ml of Neopaque Sneaker, depending on the variant
Sales unit: 1 piece
🇺🇸 Made in USA
Fixing fabric dyes
Note: When using these instructions, please note that they are only general guidelines.
You can use them in conjunction with the individual manufacturer instructions that come with the various fabric paints.
Drying time before fixing:
For best results, let the painted or printed fabric dry thoroughly for at least half an hour. We have found that the longest possible air-curing before heat-setting (up to two weeks!) in a warm, dry environment gives the best results. For faster drying, place the fabric under a lamp and then heat-set it. Heat-setting locks the paint into the fibres and allows normal washing.
Tumble dryer.
We generally do not recommend home tumble dryers, as most do not get hot enough. Commercial dryers set to a minimum temperature of 250° for 45 minutes should be sufficient. Make sure to preheat the dryer.
Fixing with an iron:
When heating with an iron, it is important to note that temperatures vary from iron to iron. If you use an iron, preheat it to the highest temperature that is safe for the fabric. Place aluminium foil on the ironing board with the painted side of the fabric facing down. Press the iron onto the back of the fabric for at least 15 to 25 seconds before moving on to the next area.
Alternatively, you can use a pressing cloth if you feel the need to iron directly on the painted side. Repeat the process without the pressing cloth on the unpainted side at the highest temperature suitable for your fabric (note: a longer air-curing time of 5 to 7 days is recommended with this method).
Professionals only:
Using a commercial conveyor oven: 350° for 3 minutes, two passes if necessary. The fabric should feel hot to set the colours.
NOTE: The optimal time and temperature needed for proper curing depend on the fabric, the coverage, the equipment and in particular the instructions of the various paint manufacturers.
Please do not try this in a domestic oven!
Jacquard Neopaque Sneaker: Frequently asked questions
Does the paint hold on sneakers?
Yes. Neopaque stays elastic and does not break even at flex points. A clean, grease-free surface, thin layers and about 4 days of curing time are important.
Can I mix the sneaker colours with regular Neopaque?
Yes, all Neopaque colours can be mixed with each other.
Do I have to varnish?
No, Neopaque is self-fixing. On leather and imitation leather you can additionally apply a clear varnish if the shoe is subject to particularly heavy wear.
Does the paint work on rubber soles?
Yes, Neopaque also adheres to rubber. Clean the sole thoroughly beforehand.
Manufacturer:
Jacquard Products | Rupert, Gibbon & Spider, Inc.
1147 Healdsburg Ave.
Healdsburg, CA 95448
USA
service@jacquardproducts.com
Responsible person in the EU (importer):
ART SELECT GmbH & Co. KG
Schützenstraße 22
21407 Deutsch Evern
Germany
vertrieb@artselect.de
Login
2 reviews
10 November 2020 16:26
Snazzy
Used Miami and Gamma Blue to bring some much-needed pizzazz to an old pair of trainers. Genuinely look good as new after a coat of this. Also want to say that the delivery was so much quicker than expected - thank you!!!!!
2 May 2020 11:30
Top!
Kaufte bisher die Sonderfarben in den USA und bin froh nun einen Händler in D gefunden zu haben. In Kombination mit den Airbrushfarben sind die Neopaque einfach unschlagbar. Macht bitte weiter so!
We ship worldwide
Top customer satisfaction!
Many payment options














































