






Prices incl. VAT plus shipping costs
Ready to ship today,
Delivery time appr. 1-3 workdays
Ready to ship today,
Delivery time appr. 1-3 workdays
Jacquard Neopaque Sneaker Series are super opaque paints with maximum coverage on virtually any dark and light ground.
They're identical to the current collections of the most famous sneaker manufacturers. The colour palette is extremely appealing - not only for sports shoes!
Professional sneaker artists use Neopaque for its outstanding durability and adhesion - not only on fabrics - it does not tear, flake or crack - even with continuous wear.
Neopaque is exceptionally washfast on fabric and durable on a great number of surfaces, such as leather, vinyle, canvas, plastic, foam, Worbla and rubber.
Jacquard Neopaque can be applied with paintbrushes, stamps, pads, wash bottles and the airbrush.
You should clean brushes and other painting tools immediately in warm water after use.
If you use a hair dryer or professional hot air dryer for drying then be careful not to burn the paints.
The best thinner for Neopaque Paints is Neopaque Extender. The more you add the more transparent the colour will be. The advantage of extender over water is that the structure and adhesion of the paint will not be reduced.
For use with an airbrush thin the paint with up to 25% of water. We also offer perfectly mixed Jacquard Airbrush Paints in many different colours, pigmentations and brightness.
Only works that have to be washed (e.g. t-shirts, jackets) must be heat set after drying.
There are different ways to do it:
Ironing:
This is the best method. Use a dry iron and iron on the back with the right setting for fabric.
Natural and synthetic fabrics, leather, vinyle, canvas, wood, paper, rubber, plastic, clay, metal, Worbla, foam and more
Selling unit: 1 piece (67ml / 236ml)
All surfaces must be clean.
Fabrics must be washed and dirt, wax, coatings and care products removed from leather.
Non porous surfaces, such as metal and plastic, may require light sanding. A base coat may be needed for blank metal.
For a long life, the airbrush paint must be overpainted with a clear varnish on hard surfaces.
Apply in light, regular coats. Avoid an oversaturation of the surface.
Use a pressure of approx. 40 psi and the nozzle size should not be less than 0,5 mm.
The colours are cross mixable, so that you will obtain a complete colour palette.
You can fix the heat resistant paint on hard surfaces with a heat gun. For fabrics, fix by ironing with a dry iron set accordingly for 30 seconds.
Varnish instructions (optional): after complete drying of the airbrush paint, spray a clear varnish in a thin and regular coat. Repeat this (if required) after complete drying of the first coat.
• Before you start working with the airbrush make sure your equipment is complete and working. Check the needle and nozzle and replace them if they're bent. Also, make sure the compressor is working properly and the air pressure is set correctly.
• Make sure you use the right nozzle size especially for metallic colours. Don't leave the paint too long in the airbrush so that it will not dry out. - When not in use, put caps on the bottles to avoid drying out.
• Dilute the paints with water if you need a thinner paint.
• Make sure to clean your equipment thoroughly as soon as you're done.
• Transparent paints work best on white and light surfaces.
• Covering paints and metallic paints work on light as well as on dark surfaces.
Much success!
Used Miami and Gamma Blue to bring some much-needed pizzazz to an old pair of trainers. Genuinely look good as new after a coat of this. Also want to say that the delivery was so much quicker than expected - thank you!!!!!
Unverified review.
Kaufte bisher die Sonderfarben in den USA und bin froh nun einen Händler in D gefunden zu haben. In Kombination mit den Airbrushfarben sind die Neopaque einfach unschlagbar. Macht bitte weiter so!
Unverified review.