






Prices incl. VAT plus shipping costs
Ready to ship today,
Delivery time appr. 1-3 workdays
Ready to ship today,
Delivery time appr. 1-3 workdays
Liquid Kicks Flat Finish is a professional, highly elastic, extra matt, dull topcoat.
Flat Finish is the mattest elastic topcoat on the market.
It allows you to create extremely cool and unusual finishes on sneakers and other products.
The brand Liquid Kicks is the new top finishes standard in the sneaker scene!
LK Top-Coats from the USA are considered the highest quality and most flexible top coats for many materials. Liquid Kicks Flat Finish can be used as a protective coating on almost all surfaces.
The manufacturer recommends this finish for leather, vinyl, PVC, canvas, cotton and silk (the product has been tested on these materials).
LK Finishes are extremely scratch proof, UV resistant, waterproof and chemical resistant.
With these products you can be sure that the colours will not peel, lift, crack or fade and will always look good!
With Liquid Kicks Flat Finish you can varnish any surface on which an acrylic varnish would also adhere. If the varnish rolls off, it cannot protect the surface completely.
Use another product on these surfaces.
Liquid Kicks Finishes are not only popular with sneaker artists, achieving these surface looks is also often essential for costumes - particularly in the Cosplay community.
Due to the extreme stretchability and flexibility of the coating, this finish is also suitable for furniture, such as sofas or armchairs.
Try it out - you will be thrilled!
LK Top Coats are top finishes made from high performance hybrid acrylic polyurethane water based resins designed for use on leather and canvas. All LK products are manufactured by Liquid Kicks themselves under very strict quality control in Harrah (Oklahoma).
Preparation:
Before application of the top finish, the colours should be completely dry.
You can dry the surface with a hair dryer or a heat gun at a maximum temperature of 170º C .
Allow the surface to cool before applying the top coat.
Application of the topcoat:
LK Top Coats can be applied in two coats with a little sponge or a soft brush.
Dry the top finish carefully with a hair dryer so that the little bubbles burst and disappear.
Apply only a very thin layer at a time.
Professionals with an airbrush can apply the top coat with a nozzle size between 0,2 mm and 0,7 mm and an air pressure between 25 psi and 35 psi. Spray LK Top-Coat with the airbrush from a distance of 10 to 15 cm or with a spray gun from a distance of 10 to 20cm directly on the surface. Apply the top coat in even layers, working from left to right and from top to bottom, overlapping each previous spray line to create medium wet layers. Be sure to let the top coat dry before starting the next coat.
Drying:
Air drying takes 35 to 50 minutes, depending on ambient temperature and humidity.
Top coats can also very well be dried with a hair dryer or a heat gun at a maximum temperature of 170º C. Drying with a hair dryer should not exceed 10 minutes.
LK Top Coats are immediately usable after complete drying, however, full resilience (chemical and scratch resistance) is only achieved after 12 hours of curing at room temperature (21°C).
Working time:
LIke any water based paint, LK Top Coats should be used quickly.
As soon as the product has been poured into an open container such as an airbrush cup or mixing cup, curing begins. A test showed that the product was usable for 2 hours at 21°C in a 3.7ml (1/8 fl. oz.) airbrush cup before performance was affected.
In a similar test in a 470ml (16 fl.oz) cup the product was usable for 6 hours.
To extend the shelf life of the top coat in the cup, store unused portions sealed with a lid.
The shelf life of unopened bottles of LK Top Coat is longer than 1 year under normal conditions.
Coverage:
A 59ml (2 oz.) bottle coats more than 15 pairs of shoes or one big leather car seat.
The coverage on canvas varies depending on the type and size of canvas.
Storage:
Store the product at temperatures between 10 and 25º C and keep away from direct sunlight to prevent oxidation. Long-term exposure to temperatures over 50° C and under 0° C may result in loss of product performance.
Keep the lid on the bottles tightly closed to prevent drying out.
Cleaning of tools:
Clean all used tools immediately with water or acetone. Cleaning of dried top coats requires harsh solvents such as MEK thinners or volatile paint strippers.
Clean your airbrush or spray gun immediately after use from all traces of finish to prevent the product from drying inside the gun and causing a blockage that is difficult to remove! Rinse until the cleaner is no longer discoloured by the finish (whitish colour).
Selling unit: 1 piece (59ml/2oz or 118ml/4oz)
Wahnsinn! Ich bin schwer beeindruckt von diesem Finish. So krass matt und sehr ergiebig.
Meine Empfehlung :-)
Unverified review.
Nachdem ich ständig die vielen Lobeshymnen auf Instagram gesehen habe, wollte ich LK auch mal selbst ausprobieren. Mein Fazit: Es gibt nichts besseres zum Versiegeln als dieses wunderbare Produkt!!! (So, jetzt habe ich auch eine Lobeshyme losgelassen ;-))
Unverified review.
Echt cooles Produkt!
Unverified review.
Ich färbe schon sehr lange Leder und kenne wahrscheinlich alle Finishs auf dem Markt. Dieses Finish von LK hat mich schwer begeistert.
Es ist hochflexibel und hält bombig. Außerdem sieht es verdammt gut aus.
Ich kann es wärmstens weiterempfehlen.
Unverified review.
Ich bin sehr begeistert von diesem supermatten Topcoat. In dieser Qualität hatte ich noch nie einen Schutzlack ausprobieren können. Auf jeden Fall werde ich die anderen LK Produkte auch kaufen!!!!
Unverified review.